Facebook

Car Flexible 3rd High Brake Rear LED Signal Light Strip Windshield Stop Bar UK

Car Flexible 3rd High Brake Rear LED Signal Light Strip Windshield Stop Bar UK

£59.97
£59.97
Add to Cart

Starts from: £100

Share this:

twitter facebook linkedin pinterest whatsapp
pro-image

About this product :

Item specifics

Condition:
: A brand-, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details.

Classic Car Part:
Yes
Fitment:
Universal for most of the car
Light length::
About 1.2M
Light Width::
About 1.02CM
Line Length:
1M
Manufacturer Part Number:
Does Not Apply
Material::
Silicone
Placement on Vehicle:
Rear
Type:
Spoiler Brake Light
Voltage::
12V
Waterproof:
IP67
Wattage::
30W
Product Description

- This listing is for one set universal roofline LED third brake tail lights, it will fit most cars as a 3rd brake light.

- A universal length LED lights as a 3rd brake light on the rear windshield, even your vehicle has an upper 3rd brake light already, you still can install this lights on your cars easily.

- Unique lighting output, it will give your car a stylish and feel that is similar to the Audi A7, BMW 6 Series Gran Coupe, Bentley Continental, and Tesla Model S

- With double-sided tape, you can easily install the lights on the rear windshield, just make sure your window is clean and free from any smudges before installing.

- This roofline LED 3rd brake light strip is designed to interior use only. Do not apply the LED third brake light outside of your car

- This LED light is polar sensitive. If you have wired the LED brakelight kit and it does not light up, try flipping the connector.


Specifications:

- Placement on Vehicle: Rear

- To Fit: Brake Light

- Led Number: 144LED

- Waterproof Rate: IP67

- Watt: 30W

- Light length: 1M

- Line length: 1M


Compatibility instructions:

- The length of your rear windshield is at least 1M

- If your existing brake light is in the way and is not removable, you will need to make some adjustments in order to affix the LED brake striplight. If you are trying to install this on an SUV that does not have a sloped windshield, you may be able to create your own holding brackets so that you can mount it in your SUV.


Installation:

Step 1: Wipe down the surface so your LED 3rd brake light can properly adhere to the glass surface.?

Step 2: Measure the length of the upper rear windshield so you know where you can line up the roofline LED brake light.

Step 3: Peel off the double-sided tape film and carefully apply the LED third brake light onto the upper rear windshield location. Hold it for 30 seconds to one minute.

Step 4: After it fully adheres, draw the wires to the existing 3rd brake light harness or tap it to the left/right tail light to finish.


Package Included:

1x LED Third Brake Tail Light Kit



| Updated: 15th September 2024

Report this item
  • Verified Sellers

    All our sellers are verified

  • Secure Payment

    100% secure payment

  • 24/7 Support

    Online Support

Added to cart

Added to cart