The BEP TSI Ultrasonic Tank Sender can be used on fuel (petrol or diesel), fresh water, grey water or black water tanks. One part number suits all tanks.
Not suitable for tank depths less than 200mm. The TSI is programmable for the following outputs, 240-33ohms, 10-180ohms, 10- 300ohms and 0-5volt. The TSI offers low profile and standard SAE 5 hole mounting pattern, allowing it to be retro fitted to practically all other sender brands. The TSI can be programmed for tank dimensions via a computer utilising BEP Marine's proprietary TSI software, avoiding experimental tank filling on site.
The TSI is configured to a 0-5v output and will connect straight into the BEP 600-TLMN digital tank monitor. When configured to a 10-300ohms, 240-33ohm or 10-180ohm output the TSI can be connected to Teleflex, Faria, VDO and many other instrument brands. When connected to non-adjustable gauges the TS1 must be pre-calibrated.
The TS1 is supplied pre-programmed to the following settings: For most fluids, apart from petrol. Please see instructions for more info. Output 0-5 volts - Tank depth 0- 2M.
Key Features
Handles common outputs – 240-33, 10-180, Vetus 10-300 and 0-5V tanks from BEP, Teleflex, Faria, VDO and many other instrument brands. (When connecting to non-adjustable gauges the TS1 must be pre-calibrated)
Low Profile Design and standard SAE 5 hole mounting pattern, allowing it to be retrofitted to practically all other sender brands.
Can be set for tank dimensions via computer using BEP™ Marine’s proprietary TS1 software, avoiding experimental tank filling on site
Is set for 0-2000mm depth off the shelf - not suitable for tank depths less than 200mm (8")
Operating voltage: 10-32V
Current draw: 25mA with 5V gauge output
Measurement method: Acoustic sonic measurement
Tank depth: 0 - 6.5 ft (up to 2000mm)
Accuracy Distance: 0 - 6.5 ft (2000mm) at 2mm accuracy
Mounting: SAE 5 stud mounting pattern with gasket, seal and screws (top mount only).
